A door that's jumped its track can jam mid-cycle or hang at a dangerous angle. We realign or replace the damaged track section and check what knocked it loose in the first place.
Every off-track call includes checking roller condition and bracket tightness alongside the track itself.
We don't eyeball alignment. Plumb and level get checked and confirmed before the job is done.
We stock standard track sections for fast replacement rather than a temporary bend-back fix.
Vehicle impacts often bend both the track and the bracket mounting it to the frame. We check both.
Whatever brought you here, one of these service lines is the fix, and one call gets a technician moving.
We realign horizontal and vertical track sections together, since a shift in one usually affects the other.
Visibly bent or dented track sections get swapped for new standard sections rather than bent back into shape.
A roller jumping the track repeatedly usually means the rollers themselves need replacing along with the fix.
Collision damage often affects more than the visible dent. We check the full track and frame mounting system.
Loose or cracked wall brackets let the track shift under normal operation. We reinforce or replace mounting hardware as part of the repair.
Let us know if the door is jammed off-track or just running rough, and we'll prioritize accordingly.
Technicians carry standard track sections and mounting hardware for common configurations.
A full inspection prevents a quick patch that fails again within weeks.
The door is confirmed running smoothly on the corrected track before the job is closed out.
“Roller kept jumping the track every few days until they found the real cause, a bent bracket.”
“Track was off plumb by more than it looked. Fixed properly instead of a quick patch.”
“Storm debris jammed the track and bent it. Same-day repair got the door working again before dinner.”
A combination of a worn roller and slightly bent track is one of the most common causes we see.
This is a job for a trained technician given the tension and alignment involved.
Minor bends can sometimes be straightened, but visibly dented or kinked sections are usually replaced for a more durable fix.
Cost depends on whether it's a simple realignment or a full track section replacement, confirmed as a flat price on-site.
Continuing to run an off-track door usually causes more damage to the track, rollers, and panel.
Most off-track repairs are completed same-day, typically within one to two hours on-site.
Licensed technicians, flat-rate pricing, and a truck stocked for this exact job.
☎ Call +1-831-293-1591From one side of Fairfax to the other, dispatch is built to reach you quickly.
Embedded Map Placeholder for Fairfax, VA